Unchained Preppers
General Category => D.I.Y. => Topic started by: Kbop on September 15, 2017, 10:06:55 PM
-
i put up a quick shed - i think the clamps are cool.
https://drive.google.com/file/d/0B3zsWdoSW_r4dkhkQ0ZLajF6SDA/view?usp=sharing (https://drive.google.com/file/d/0B3zsWdoSW_r4dkhkQ0ZLajF6SDA/view?usp=sharing)
-
Yes it is a cool shed Kbop. Have you put one together or maybe this is your shed and article. Thx for posting.
-
Did you design and build that yourself?
Get a schematic or or buy a kit or is all a construct of your own mind?
Nemo
-
i wrote the article attached - its a shed my wife and i put up.
-
the one i put together is in the article - the photogenic denizens are our sheep (its for the Ram pen).
My wife and i decided we needed a better winter shelter for them. I wanted a design that was easy and bullet proof simple. i created the concept, designed it, and the wife and i built it.
its just a simple run-in or loafing shed design. i picked this because its cost effective. And i didn't have to weld all the joints- the load strength on the joints exceeds my needs.
i posted some of this awhile ago - someone moved the original post (i have now found it- i just had a hard time figuring out where i had posted it). I think it got moved to DIY by a moderator (at any rate, i couldn't find the first post). I was going to put it all together for this forum and finally got around to the 'paperwork' part of it.
if you have any other questions, let me know.
-
i found the first post. - it has more information on the project and the clamps i used. One quick change - I used Ubolts for the side battens (to hold the 2x4 to the pole) - cheaper.
[spoiler]http://www.homedepot.com/p/Everbilt-5-16-in-x-1-3-4-in-x-4-3-16-in-Coarse-Zinc-Plated-Steel-U-Bolt-806876/204273751 (http://www.homedepot.com/p/Everbilt-5-16-in-x-1-3-4-in-x-4-3-16-in-Coarse-Zinc-Plated-Steel-U-Bolt-806876/204273751)[/spoiler]
http://unchainedpreppers.com/forum/gear-review/quick-up-and-down-building-shed/msg68912/#msg68912 (http://unchainedpreppers.com/forum/gear-review/quick-up-and-down-building-shed/msg68912/#msg68912)
-
Outstanding article Kbop! :cheers:
Thank you so much for posting it here. :pirateThumbUp:
-
:bravo:
Nemo
-
Awesome!
I remember one of Wranglstars earliest videos when he moved onto his current property he showed a wooden barn of similar size that he stated belonged to the original property owners. I think he stated it was from the 19th century and worked for them.
A great deal to get a similar structure in metal and be as well equipped as farmers in the Cascades in the 1800s. :fuckYeah: